DirecTV DSR 660 manual Main Menu System Upgrades, Setup System Test, Setup System Information

Main Menu (cont’d)

Setup: System Test

This option performs a test of the system.This information is useful in troubleshooting if you need to contact customer service.

To run a system test:

1.At the Setup menu, select “System Test” and press OK.

2.To launch a test, press the Run button.A message “Test in progress, Please Wait . . .” may appear.After a few seconds, the test results will display. Press Cancel to cancel a test while in progress.

Note: TV2 displays no test results for the Access Card Status and

Phone Line Connection.

“System Test” menu

Setup: System Information

This option shows information about your hardware and software that will be useful in troubleshooting if you need to contact cus- tomer service.

To view system information:

1.At the Setup menu, select “System Information” and press OK.

2.Use the PAGE +/- buttons to scroll the information.

“System Information” menu

Main Menu: System Upgrades

Your DIRECTV® Multi-Room Receiver is able to receive upgrades or modifications to some of its features and functions. These modifications will occur automatically, usually at times when the DIRECTV Receiver is not likely to be in use. If your DIRECTV Receiver is on when an upgrade or modification is sent, reception may be interrupted for a minute or two. Reception should return to normal after the modification is complete.Your DIRECTV Receiver must be plugged in to receive an upgrade. Do not unplug your DIRECTV Receiver while an upgrade is in progress. Consult the System Upgrades menu to find a schedule of upgrades or modifications planned by DIRECTV.

To view past or future upgrades:

1.Press MENU.

2.Select “System Upgrades” in the Main Menu and press OK.

3.Use the 89 buttons to select “Past Upgrades” or “Future Upgrades” and press OK.

34