Troubleshooting TV2
This section is specific to TV2.
No picture | 1. | Make sure TV2 power is on.The TV2 power indicator on the front panel of the receiver |
|
| should be on. |
| 2. | Check TV2 connections. |
| 3 | Check the DIRECTV® |
|
| a. check the selected frequency type (i.e.Terrestrial or Cable) is correct (see page29). |
|
| b. check the modulator frequency is set on the appropriate channel (see page29). |
No sound | 1. | Make sure that the TV2 volume is not set to mute. |
| ||
| 2. | Check TV2 connections. |
Remote does not |
|
|
work | 1. | Make sure the batteries are inserted correctly (see page 13) and are not dead. |
| 2. | Be sure you are within operating range of the TV2 remote control attachment. |
| 3. | Make sure no objects obstruct the line of sight between the remote and the TV2 remote |
|
| control attachment. |
| 4. | The TV2 remote control attachment LED is off: |
|
| a. check the TV2 remote control attachment connections. |
|
| b. check TV2 remote control attachment is enabled. |
| 5. | The TV2 remote control attachment LED is on: |
|
| a. check you are using the TV2 remote control. |
|
| b. if the remote control ID was changed so the DIRECTV Receiver and the remote no longer |
|
| communicate, change the ID number back to the previous ID number (see page 28). |
37