Page, Diagnostics Screen | Dish Network HOME NETWORK specification

Image 12

Dish Network HOME NETWORK manual Page, Diagnostics Screen

Contents

Home Network Installation Instructions Installation Instructions Table of ContentsInstallation Considerations Quick Installation Instructions Quick Installation Instructions Overview Identifying and Creating the Home Network and Available Ethernet Port Identifying the Home Network and Receiver Connection Method No. Go to Adding an Ethernet Switch on page Figure 4. Identifying Ethernet Switch or HubFigure 5. Identifying Available Ethernet Port on Switch or Hub Figure 3. Identifying Available Ethernet Port Installation and Setup Adding an Ethernet SwitchDiagram 1. Overview of Home Network with Ethernet Switch Connected Diagram 2. Connecting an Ethernet Switch to the Router INTERNET, or WAN Connecting the Satellite Receiver to an Available Ethernet Port Diagram 4. Connecting the Receiver to the Router Using Ethernet Cable Ethernet Port Ethernet Port One HomePlug-to-Ethernet adapter must be obtained for use at the location of the router, gateway, or Ethernet switch. One adapter supports up to 15 receivers. The ViP-series of DISH Network receivers include HomePlug 1.0 support. HomePlug Turbo adapters can also be used Select Done to exit the Network Setup screen Diagnostics Screen Using DishONLINE Download List Troubleshooting ProcedureHomePlug Troubleshooting section on page Description address on the receiver’s Network Setup screen shows all 0s on page Network Setup. Select Reset Connection HomePlug 156342