Page | Dish Network HOME NETWORK manual

Figure 3. Identifying Available Ethernet Port

Is there an available ETHERNET or LAN port on the router or gateway?

•Yes. Go to Connecting the Satellite Receiver to an Available Ethernet Port on page 7.

•No. Go to step 3.

Router or

Gateway

Ethernet

Port

Figure 3. Identifying Available Ethernet Port

Is there an Ethernet switch (or hub) connected to one of the ETHERNET or LAN ports on the router or gateway?

•Yes. Go to step 4.

•No. Go to Adding an Ethernet Switch on page 5.

Router or Gateway

Ethernet Switch

or Hub

Is there an available

ETHERNET or LAN port

on the Ethernet switch (or hub)?

•Yes. Go to Connecting the Satellite Receiver to an Available Ethernet Port on page 7.

•No. Go to Adding an Ethernet Switch on page 5.

Figure 4. Identifying Ethernet Switch or Hub

Ethernet Switch

or Hub

	Router or	Available
	Gateway
		Ethernet Port

Figure 5. Identifying Available Ethernet Port on Switch or Hub

Page 4

Image 5

Dish Network HOME NETWORK manual No. Go to Adding an Ethernet Switch on page, Page, Identifying Available Ethernet Port

Contents

Installation Instructions Home Network Table of Contents Installation InstructionsInstallation Considerations Quick Installation Instructions Overview Quick Installation Instructions Identifying the Home Network and Receiver Connection Method Identifying and Creating the Home Network and Available Ethernet Port Figure 4. Identifying Ethernet Switch or Hub No. Go to Adding an Ethernet Switch on pageFigure 5. Identifying Available Ethernet Port on Switch or Hub Figure 3. Identifying Available Ethernet Port Adding an Ethernet Switch Installation and SetupDiagram 1. Overview of Home Network with Ethernet Switch Connected Diagram 2. Connecting an Ethernet Switch to the Router INTERNET, or WAN Diagram 4. Connecting the Receiver to the Router Using Ethernet Cable Connecting the Satellite Receiver to an Available Ethernet Port Ethernet Port Ethernet Port One HomePlug-to-Ethernet adapter must be obtained for use at the location of the router, gateway, or Ethernet switch. One adapter supports up to 15 receivers. The ViP-series of DISH Network receivers include HomePlug 1.0 support. HomePlug Turbo adapters can also be used Select Done to exit the Network Setup screen Diagnostics Screen Using DishONLINE New Releases and DISH Theater Procedure TroubleshootingHomePlug Troubleshooting section on page Description Network Setup. Select Reset Connection address on the receiver’s Network Setup screen shows all 0s on page HomePlug 156342