CARE AND MAINTENANCE
BELT TENSION
TRANSAXLE DRIVE BELT: | P/N 7650 |
No adjustment required. |
|
ENGINE TO MOWER DECK BELT: | P/N 7725 |
No adjustment required. |
|
Correct belt tension is maintained through a fixed engine location and a spring loaded idler system.
A pulsing movement of the belt idler will be observed both during engagement of the electric blade clutch and actual operation of the mower deck.
NOTE: Engagement of the electric blade clutch switch may produce a sharp high pitched chirp or squeal as the belt tension loading is absorbed by the idler system. This is normal and not a sign of failure.
MOWER DECK SERPENTINE BELT: | P/N 6109 |
Refer to illustration for adjustment procedure.
Idler Weldment
| Idler Shock Mount |
"L" Rod | Hex |
| Nut |
3
4
Tighten or Loosen Hex Nut to achieve this Dimension
Page 24
