CONTROLS
BLADE DRIVE:
•Located on the control panel, on operator’s right.
•To engage the mower blade, pull up on the switch.
•To disengage mower blade, push down.
CIRCUIT BREAKER :
•Protection of the electrical system is by
(1) 15 amp circuit breaker.
•If circuit breaker trips, push button to reset.
•If this condition repeats, consult dealer for inspection and repair.
THROTTLE & CHOKE CONTROL LEVER :
•Located on control panel to operator’s right.
•Move throttle lever full forward for choke. •Move back to detent for full throttle. •Move throttle to the rear for idle.
Note: Run engine at full throttle when mowing for best cut and efficiency.
17
