CARE AND MAINTENANCE
CAUTION HOT oil may cause burns. Allow engine to cool before draining oil.
CHANGING THE ENGINE OIL:
1.The “Dapco” oil drain valve is located on the front of engine on the right side.
2.Place a suitable container under the drain valve hose.
3.To drain, turn hex head valve stem
4.Remove oil flter.
5.Install new oil filter. Clean seal surface and oil seal on filter. Tighten to finger tight and then 3/4 turn further.
6.Close engine drain valve.
7.Refer to engine manufacturer’s recommen- dations for frequency of oil changes, type of oil and amount of oil required.
Hex Head Valve Stem
PLEASE DISPOSE OF USED OILS AT PROPER COLLECTION CENTERS.
PROTECT YOUR ENVIRONMENT.
36