CARE AND MAINTENANCE

MOWER DECK LEVELING PROCEDURE:

1.Place mower on a smooth, level surface and check tire pres- sures to insure correct stance. Tires should be inflated as follows.

Front: 16 - 21 lbs

Rear: 8 - 14 lbs

2.Turn each outer blade tip to align with the deck in a side to side manner.

3.Measure from the floor surface up to the bottom of the blade tip on the discharge side of the mower. Retain this measure- ment. Move to the opposite side and check to see if that measurement is the same. If adjustment is required, turn nut on one or both of the rear L-rods until both measurements are equal.

4.Turn each outer blade tip to align with the deck in a front to rear manner.

5.Measure from the floor surface up to the bottom of the blade tips at both the front and rear of the blades. Rear of blade tips should be to 1/8" to 3/8" higher than the front of blade tips. If adjustment is necessary, turn nut on front retaining rod.

NOTE:

This will place the mower deck in a base measurement position.

 

Additional adjustment may be required to achieve desired cut for

 

the type of grass or conditions involved.

34

Page 33 Page 35
Page 34
Image 34
Dixon 3500 Series manual Mower Deck Leveling Procedure
Page 33 Page 35

3500 Series specifications

The Dixon 3500 Series is an advanced line of industrial-grade pumps designed for superior performance in various applications. Renowned for their reliability and efficiency, these pumps are particularly well-suited for use in construction, mining, and agricultural settings, where the demand for robust and durable equipment is paramount.

One of the standout features of the Dixon 3500 Series is its high flow rate capability, enabling it to handle large volumes of liquids quickly and effectively. This characteristic makes it an ideal choice for dewatering applications, where rapid drainage is essential. With a variety of configurations and sizes available, users can select the model that best fits their operational needs.

The 3500 Series incorporates cutting-edge technologies that enhance its performance and longevity. A key technology utilized is the advanced hydraulic design that minimizes turbulence, thereby optimizing the efficiency of fluid transfer. This results in lower energy consumption, making it a cost-effective option for organizations looking to reduce operational expenses.

Durability is another critical characteristic of the Dixon 3500 Series. Constructed from high-quality materials, these pumps are built to withstand harsh environments, featuring corrosion-resistant coatings and rugged casings. Additionally, they are designed with easy maintenance in mind, allowing for quick inspections and repairs to minimize downtime.

Furthermore, the Dixon 3500 Series is equipped with user-friendly controls and monitoring systems. This includes intuitive interface options that facilitate real-time monitoring of pump performance, ensuring that users can quickly identify potential issues and address them proactively. Enhanced safety features are also included, providing peace of mind during operation.

The versatility of the Dixon 3500 Series cannot be overstated. It supports a wide range of applications, from pumping water and slurry to handling chemicals and other liquids. Thanks to its modular design, users can easily adapt the pump for different tasks, making it a valuable asset in various industrial settings.

In summary, the Dixon 3500 Series exemplifies a perfect blend of power, efficiency, and durability. With its high flow rate capabilities, advanced hydraulic design, and robust construction, it stands out as a top choice for professionals seeking reliable pumping solutions in demanding environments. Whether for dewatering, chemical transfer, or other industrial applications, the 3500 Series delivers exceptional performance tailored to meet the needs of modern industries.
Top Page Image Contents