UNPACKING INSTRUCTIONS
•Remove all parts and packing materials from carton.
TOOLS REQUIRED
•Drill and 11/32" drill bit - 3 bag system only
•5/16" Wrench or ratchet and socket
•7/16" Wrench or ratchet and socket
•½" Wrench or ratchet and socket
•¾" Socket
•Torque Wrench
•Phillips Head Screwdriver
•Pliers
BAG DUMP INDICATOR
CONTAINER CONTENTS
• | Blower Assembly | • | Drive Pulley |
• | Belt Shield | • | Belt |
• | Mounting Assembly | • | Bag of Hardware |
•Weight
(not included in 50" Kit 539 132397 or 60" Kit 539 132252)
UPPER CHUTE
MIDDLE CHUTE
BELT COVER
BLOWER HOUSING
NOTE: When right hand (RH) and left hand (LH.) are mentioned in this manual, it means when seated on the mower in the operator’s position.
CAUTION
BEFORE ASSEMBLING GRASS CATCHER TO MOWER:
•Set parking brake.
•Place motion control levers in “NEUTRAL” position.
•Turn ignition key “OFF” and remove key.
•Make sure the blades and all moving parts have completely stopped.
•Disconnect spark plug and place wire where it cannot come in contact with plug.
7
