ASSEMBLY
4INSTALLING BELT COVERS
1.Place deck belt shield over spindle, aligning hole with bolt on belt shield standoff.
2.Attach with wing nut to standoff and use tap screw from kit to attach the other side of the belt shield to the deck.
3.Place retainer on the outer pulley cover.
4.Align the tab end of the belt cover into the slot on the deck belt shield and the other end over the end of the outer pulley cover.
5.Secure with knob.
KNOB
BELT COVER TAB
DECK BELT SHIELD
OUTER PULLEY COVER
TAP SCREW
DECK BELT SHIELD
WING
NUT
BELT SHIELD STANDOFF
MIDDLE CHUTE LATCH
RETAINER
10