ASSEMBLY
2MOUNTING BLOWER ASSEMBLY
1.Install the front and rear mount brackets to the deck with the pin and hairpin cotter supplied with the kit.
HAIRPIN COTTER
3INSTALLING DRIVE BELT
1.Make sure the tension release lever is forward or disengaged.
2.Place the belt over the pulley on the deck. Refer to illustration for proper routing.
3.Move the tension release lever to the rear and engage in the latch.
TENSION RELEASE LEVER | OUTER PULLEY |
|
| PIN |
|
OUTER PULLEY COVER | REAR OF DECK | TWIST IN BELT |
| IDLER PULLEYS | |
|
|
9
