TROUBLESHOOTING
MOWER CUT QUALITY:
There are many variables that can effect the cut quality of any riding mower. Type and
conditions of grass, cut height setting, engine RPM and ground speed are some of the variables
that interact creating differences in cut quality. Examination of one 0r more of the above will
generally produce a quality cut.
The Troubleshooting Chart suggests practices and adjustments that may be helpful in
improving cut quality. Your Dixon ZTR dealer js also available to provide assistance to you.
Poor cut quality
Loose engine to mower deck
belt
Refer to pages 24-25
Poor cut quality
Engine RPM too low
Increase engine RPM to maximum
Poor cut quality
Dull or bent blade
Sharpen or replace as required
Poor cut quality
Un-level mower deck
Consult your dealer
Poor cut quality
Grass buildup under mower
deck
Clean out underside of mower deck
Poor cut quality
Improper blades
Replace with original equipment blade
designed for the 4000 Series Models
Uneven tire pressures Check and adjust as required per
operators manual
SITUATION
CAUSES
REMEDY
Poor cut quality
Ground speed
Reduce mowing speed
Poor cut quality
Page 32