CONTROLS:
BLADE DRIVE:
Located on control panel, on operator's right.
To engage the mower blades, lift switch up lightly and push forward.
To disengage blades, pull switch backward.
Switch is clearly marked "on and off".
MOWER DECK CUT HEIGHT LIFT LEVER:
Located to the right and front of operator.
Controls the cutting height.
Eight positions of adjustment.
Move lever in and forward to lower.
Move lever in and back to raise.
NOTE: Always use high for transport.
CIRCUIT BREAKER:
Protection of the electrical system is by (1)15 amp circuit breaker.
If circuit breaker trips, push button to reset.
If this condition repeats, consult dealer for inspection and repair.
Page 15
