DOD Bass30 manual

1. Connect your instrument to the Bass30 input jack.

2a.(mono) Connect the left output to the input of your amplifier, or line input of a mixing console.

2b. (stereo) Connect the left and right outputs to the inputs of two amplifiers, or two line inputs of a mixing console.

2c. (bi-amp)Connect the left output to the power amp driving the low frequency speakers, and the right output to the power amp driving the high frequency speakers.

3.Set the tone controls of the amplifier(s) or mixing console to the flat position. If you are running stereo into a mixer set the pan controls hard left and hard right. Turn your amplifier or mixer’s volume level down.

4.Apply power to the Bass30 by connecting the PS750 from the power jack to an AC outlet.

5.Turn the power switch of your amplifier(s) or mixer to the “on” position.

6.Begin playing and gradually increase the amplifier(s) or mixer’s volume until the desired level is achieved.

7