Rotate the Data Wheel until the Display shows 0. Press the Tone/Gate button again and the LED next to Low Mid flashes. Rotate the Data Wheel until the Display shows 0.Press the Tone/Gate button again and the Bass LED will flash. Rotate the Data Wheel until the Display shows 6. Press the Tone/Gate button one more time and the Gate LED flashes. Rotate the Data Wheel until the Display shows 3.
Step 6 Select the Chorus Effect - Press the Effect button until the LED next to Chorus is flashing. If the Chorus is bypassed (indicated by two dashes -- in the Display), rotate the Data Wheel until the Display shows on. You will notice that the Parameter LEDs next to the words “Speed,” “Depth,” and “Level” are now lit. This indicates that these three Parameters are associated with the Chorus, and available for adjustment. Press the Parameter Edit button once and the Speed LED will begin to flash indicating that you are about to edit the Chorus Speed. The Display will show the current value for the Chorus Speed. Since our sample Preset calls for a slow medium Chorus, use the Data Wheel to set the Speed value to 5. Press the Parameter button again and the Depth LED flashes. Rotate the Data Wheel until the Display shows 10. Press the Parameter button again and the Level LED flashes. Rotate the Data Wheel until the Display shows 50.
