tep 6 Select the Chorus Effect - Press the Effect button until the LED next to Chorus is flashing. If the Chorus bypassed (indicated by two dashes
ou will notice that the Parameter LEDs next to the words “Speed,” “Depth,” and “Level” are now lit. This ndicates that these three Parameters are associated with the Chorus, and you can adjust these parameters. Press he Parameter Edit button once and the Speed LED will begin to flash indicating that you are about to edit the horus Speed. The Display will show the current value for the Chorus Speed. Since our sample Preset calls for a ow medium Chorus, use the Data Wheel to set the Speed value to 5. Press the Parameter button again and the epth LED flashes. Rotate the Data Wheel until the Display shows 10. Press the Parameter button again and the evel LED flashes. Rotate the Data Wheel until the Display shows 50.
