![](/images/new-backgrounds/1279341/27934121x1.webp)
INTRODUCTION
NOTE: This DVD player will play DVD movies as well as Audio CDs. To simplify, we refer to these as “discs” in this booklet. Your DVD player is equipped with some special features. The following information summarizes some of these features.
The On-Screen Information Display
This menu bar display can display and access certain features while discs are playing (or before play
Ratings Limits
Your DVD player allows you to set ratings limits and passwords. For example, you can set the DVD player so that any movie with a PG- 13 rating or above requires a password to be entered. There are many levels of ratings to choose from.
Since not all discs contain ratings, you can also decide if you want to allow free access or require a password to view unrated discs.
Screen Saver
When the DVD’s power is on and the movie finished playing, 5 minutes later, your DVD will change to “Screen Saver” mode automatically (if you set the SCREEN SAVER to ON as explained on Page 18). For example, when playing a CD music disc (no video output), the screen will display the “Screen Saver” moving icon, and you will see a moving ball on the screen. You may exit the “Screen Saver” mode by pressing any of the remote buttons.
LOCATION OF CONTROLS
FRONT PANEL
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
POWER
ON |
|
|
|
|
|
|
|
|
OFF | D | I | G | I | T | A | L | ON SCREEN DISPLAY |
|
|
OPEN/CLOSE | PAUSE | STOP |
| PLAY | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PREVIOUSNEXT
POWER ON | STANDBY | PLAY |
DVD / Mp3 / CD PLAYER |
12 | 11 | 10 |
1.POWER button - Press to switch the set on or off.
2.POWER ON indicator - Lights red when POWER is on.
3.STANDBY indicator - When the power is on, press the POWER button on the REMOTE, this indicator lights up in GREEN and the player is off in standby mode.
4.PLAY indicator - During play, this indicator lights up, also when you press any button on the REMOTE, this lamp flashes rapidly to show you the remote’s signal was received.
5.DISC TRAY - Set the disc into this tray.
CAUTION: Do not put anything but a disc on the tray.
6.OPEN/CLOSE button - Opens and closes the DISC TRAY.
7.PAUSE button - Press to pause or step the picture.
8.STOP button - Stops playing the disc.
9.PLAY button - Press to start playing the disc.
10.NEXT SKIP button - Skips to next chapter (forwards).
11.PREVIOUS SKIP button - Skips to previous chapter (backwards).
12.REMOTE CONTROL SIGNAL sensor - Receives the signal from the REMOTE CONTROL (Aim the REMOTE towards this sensor).
10 |
| |
|