CONNECTIONS
DVD Player + TV/VCR Combination
NOTE:
NOTE:
On some combination TV/ VCR sets, you may have to unplug the VCR cable for the DVD set to operate properly.
A Video RF Modulator is needed for any TV/VCR combined set which do not have VIDEO & AUDIO inputs jacks. Some TV/VCR sets have VIDEO & AUDIO inputs, for these sets you do not need an RF Modulator.
1.Insert the audio cables to the AUDIO OUT L (left=white) and R (right=red) jacks on the back of your DVD Player, and into the corresponding AUDIO IN jacks on your VIDEO RF MODULATOR.
2.Connect the video cable (yellow) to the VIDEO OUT jack on the back of your DVD player, and into the Video Input jack on your VIDEO RF MODULATOR.
3.Insert the RF MODULATOR’S antenna cable (not included) into the ANTENNA jack on the back of your TV/VCR player, and to the TV OUT jack of your VIDEO RF MODULATOR.
4.Insert the AC power cord into an AC outlet.
5.Go to Page 20 for playing DVDs (discs).
7 |
| |
|
