Dolby Laboratories DVD- 2OO3 instruction manual DVD Player + TV + VCR + Satellite Receiver

CONNECTIONS

DVD Player + TV + VCR + Satellite Receiver

(

)

-

3

This antenna connection is the same as you have now.

1.Insert the audio cables to the AUDIO OUT L (left -white) and R (right-red) jacks on the back of your DVD Player, and into the corresponding AUDIO IN jacks on your TV.

2.Connect the video cable.

• Basic video connection - Insert the video cable (yellow) into the VIDEO OUT jack on the back of your DVD

Player, and into the VIDEO IN jack on your TV.

OR

•S-Video (optional) - If your TV has an S-Video Input jack, insert the S-Video cable into the S-VIDEO OUT jack on

the back of your DVD player and into the S-Video jack on your TV. If your TV doesn’t have S-Video, use the basic video connection listed above as on Page 4 (yellow plugs: VIDEO IN or OUT, are not needed for S-Video).

3.Use an antenna cable to connect the antenna output on the satellite receiver to the antenna input on the VCR the same as you have it connected now. This DVD player does not change any antenna connections.

4.Insert the AC power cord into an AC outlet.

5.Go to Page 20 for playing DVDs (discs).

9 IB-DVD2003-COMPUSA-E-061202