6. Consequential Coverage

Coverage hereunder shall extend to the failure of any engine compo- nents caused by the failure of any warranted part still under warranty.

EMISSIONS COMPONENT DEFECT WARRANTY COVERAGE

DOLMAR GmbH North American Division (Dolmar) warrant to the ini- tial retail purchaser and each subsequent owner, that this utility equipment was designed, built, and equipped to conform at the time of initial sale to all applicable regulations of the U.S.

Environmental Protection Agency (EPA), and that the engine is free of defects in materials and workmanship which would cause this engine to fail to conform with EPA regulations during its warranty period.

For the components listed under PARTS COVERED, the service dealer authorized by Dolmar will, at no cost to you, make the neces- sary diagnosis, repair, or replacement necessary to ensure that the engine complies with applicable U.S. EPA regulations.

EMISSISON COMPONENT DEFECT WARRANTY PERIOD

The warranty period for this engine begins on the date of sale to the initial purchaser and continues for a period of 2 years.

PARTS COVERED

Listed below are the parts covered by the Emission Components Defect Warranty. Some of the parts listed below may require sched- uled maintenance and are warranted up to the first scheduled replacement point for that part.

(1)Fuel Metering System

(i)Carburetor and internal parts

(ii)Fuel filter, if applicable.

(iii)Throttle stopper, if applicable.

(iv)Choke System, if applicable.

(2)Air Induction System

(i)Air cleaner plate

(ii)Air cleaner case

(3)Ignition System

(i)Spark plugs.

(ii)Flywheel Magneto

(iii)Ignition Coil.

(4)Miscellaneous Items Used in Above Systems

(i)Fuel hoses, clamps and sealing gaskets

OBTAINING WARRANTY SERVICE

To obtain warranty service, take your engine to the nearest DOLMAR Factory Service Center or service Center authorized by Dolmar. Bring your sales receipts indicating date of purchase for this engine. The dealer of service authorized by Dolmar will perform the necessary repairs or adjustments within a reasonable amount of time and fur- nish you with a copy of the repair order. All parts and accessories replaced under this warranty become the property of Dolmar.

WHAT IS NOT COVERED

Conditions resulting from tampering, misuse, improper adjustment (unless they were made by the service dealer authorized by Dolmar during a warranty repair), alteration, accident, failure to use the rec- ommended fuel and oil, or not performing required maintenance services.

-The replacement parts used for required maintenance services.

-Consequential damages such as loss of time, inconvenience, loss of use of the engine or equipment, etc.

-Diagnosis and inspection charges that do not result in war- ranty-eligible service being performed.

-Any non-authorized replacement part, or malfunction of autho- rized parts due to use of non-authorized parts.

OWNER’S WARRANTY RESPONSIBILITIES

As the engine owner, you are responsible for the performance of the required maintenance listed in your owner's manual. Dolmar recom- mends that you retain all receipts covering maintenance on your engine, but Dolmar cannot deny warranty solely for the lack of receipts or for your failure to ensure the performance of all sched- uled maintenance. As the engine owner, you should however be aware that Dolmar may deny warranty coverage if your engine or a part has failed due to abuse, neglect, improper maintenance or unap- proved modifications.

You are responsible for presenting your engine to the nearest service dealer authorized by Dolmar when a problem exists.

If you have any questions regarding your warranty rights and respon- sibilities, you should contact the Dolmar Warranty Service Depart- ment at 1-888-OPE-PART for the information.

THINGS YOU SHOULD KNOW ABOUT THE EMISSION CONTROL SYSTEM WARRANTY:

MAINTENANCE AND REPAIRS

You are responsible for the proper maintenance of the engine. You should keep all receipts and maintenance records covering the per- formance of regular maintenance in the event questions arise.

These receipts and maintenance records should be transferred to each subsequent owner of the engine. Dolmar reserves the right to deny warranty coverage if the engine has not been properly main- tained. Warranty claims will not be denied, however, solely because of the lack of required maintenance or failure to keep maintenance records.

MAINTENANCE, REPLACEMENT OR REPAIR OF EMISSION CON- TROL DEVICES AND SYSTEMS MAY BE PERFORMED BY ANY REPAIR ESTABLISHMENT OR INDIVIDUAL; HOWEVER, WARRANTY REPAIRS MUST BE PERFORMED BY A SERVICE DEALER AUTHO- RIZED BY Dolmar. THE USE OF PARTS THAT ARE NOT EQUIVALENT IN PERFORMANCE AND DURABILITY TO AUTHORIZED PARTS MAY IMPAIR THE EFFECTIVENESS OF THE EMISSION CONTROL SYSTEM AND MAY HAVE A BEARING ON THE OUTCOME OF A WARRANTY CLAIM.

If other than the parts authorized by Dolmar are used for mainte- nance replacements or for the repair of components affecting emis- sion control, you should assure yourself that such parts are warranted by their manufacturer to be equivalent to the parts autho- rized by Dolmar in their performance and durability.

HOW TO MAKE A CLAIM

All repair qualifying under this limited warranty must be performed by a service dealer authorized by Dolmar. In the event that any emis- sion-related part is found to be defective during the warranty period, you shall notify Dolmar Warranty Service Department at 1-888-OPE- PART. Dolmar and you will be advised of the appropriate warranty service dealer or service providers where the warranty repair can be performed.

3

Page 3
Image 3
Dolmar MS-331 C Emissions Component Defect Warranty Coverage, Emissison Component Defect Warranty Period, Parts Covered

MS-231 C, MS-261 C, MS-331 U, MS-331 C, MS-261 U specifications

The Dolmar range of chainsaws, including the MS-261 U, MS-331 C, MS-331 U, MS-261 C, and MS-231 C, represents innovation and performance in outdoor power equipment. These models are engineered for both professional and recreational use, catering to various cutting needs.

The MS-261 U stands out with its lightweight design and powerful engine, offering a balance between efficiency and portability. It features a 50.2 cc engine that delivers robust power for various tasks, from tree trimming to felling. The AutoReturn choke system simplifies starting, while its anti-vibration technology ensures operator comfort during extended use.

The MS-331 C takes performance further with its larger 59 cc engine, designed for demanding applications. One of its key features is the M-Tronic technology, which automatically adjusts the fuel mixture for optimal performance in different conditions, ensuring consistent power and efficiency. Additionally, the saw is equipped with a system that allows for quick chain tensioning, reducing downtime and increasing productivity.

The MS-331 U combines the power of the MS-331 C with an ergonomic design suited for professional forestry work. This model is particularly designed for heavy-duty applications, featuring a larger fuel tank for extended running time. Its advanced vibration dampening system significantly reduces operator fatigue, making it ideal for long workdays.

In contrast, the MS-261 C is more compact and lightweight, making it a preferred choice for those who need versatility and maneuverability. This model integrates a Catalytic Converter, which not only enhances performance but also reduces emissions, making it an environmentally-friendly option. The inclusion of a premium air filter extends the intervals between maintenance, enhancing overall user experience.

Lastly, the MS-231 C is tailored for homeowners and light commercial use. Its efficient 45.6 cc engine is powerful yet easy to handle, making it perfect for casual users and those new to chainsaw operation. The Quick Stop chain brake and low vibration technology are standard features, promoting safety and comfort.

Overall, the Dolmar MS series combines innovative technologies and user-friendly features that cater to a wide audience, providing reliable solutions for cutting tasks ranging from casual yard work to professional logging operations. Each model emphasizes power, efficiency, and comfort, ensuring a productive experience for every operator.