Henny Penny 342 manual Filter Pump and Motor Removal, Autolift, Transformer Replacement

Model OFE/OFG/OEA/OGA-341, 342

2-21. FILTER PUMP AND MOTOR REMOVAL (Continued)

7. Remove left side panel.

	8.	Using 9/16” socket or wrenches, remove the bolts and nuts
		securing the motor to the bracket and pull pump, motor, and
		piping from unit. Figure 2-74.
Figure 2-74
2-22. AUTOLIFT	1.	Remove electrical power supplied to unit.
TRANSFORMER
REPLACEMENT
(if applicable)
		To avoid electrical shock or property damage, move the
		power switch to OFF and disconnect main circuit
		breaker, or unplug cord at wall receptacle.
	2.	Remove control panel.
	3.	Label and remove wires from transformer. Figure 2-75.

Figure 2-75

4.Using 3/8” nut-driver or wrench, remove nuts securing transformer to panel and remove transformer from panel. Figure 2-76.

5.Install new transformer in reverse order.

Figure 2-76

1003 2-27