Model OFE/OFG/OEA/OGA-341, 342

2-24. AUTOLIFT ACTUATOR (MOTOR) REPLACEMENT

(if applicable)

8.Remove the 2 top screws securing the support plate and remove the plate from the unit. Figure 2-84.

Figure 2-84

9.Using a 15T torx driver, remove the 2 torx screws from the back shroud, and pull the actuator from the unit. Figure 2-85.

Figure 2-85

10. Install new actuator in reverse order.

2-30

1003

Page 30
Image 30
Henny Penny 342 manual Install new actuator in reverse order