Henny Penny 342 manual If applicable, Actuator Motor Replacement

		Model OFE/OFG/OEA/OGA-341, 342
2-23. AUTOLIFT PC BOARD 1. Remove electrical power supplied to unit.
REPLACEMENT
(if applicable)
Autolift PC Board		To avoid electrical shock or property damage, move the
		power switch to OFF and disconnect main circuit
		breaker, or unplug cord at wall receptacle.
	2.	Remove control panel
	3.	Disconnect connectors from PC board.
Figure 2-77	4.	Using 5/16” nut-driver or wrench, remove the 4 nuts securing
		the autolift PC board to the panel and remove PC board from
		panel.
	5.	Install new panel in reverse order.
2-24. AUTOLIFT	1.	Remove electrical power supplied to unit.
ACTUATOR (MOTOR)
REPLACEMENT
(if applicable)
		To avoid electrical shock or property damage, move the
		power switch to OFF and disconnect main circuit
		breaker, or unplug cord at wall receptacle.
	2.	Drain shortening from frypot.

Figure 2-783. Remove basket and knock pin from basket hanger. Figure 2-78.

4. Remove rear cover. Figure 2-79.

Figure 2-79

2-28 106