1.1.6 Front and Rear View for Vigor2700VGi
| LED | Status | Explanation |
| |||
| WLAN | On | Wireless access point is ready. |
|
| Blinking | Ethernet packets are transmitting over wireless LAN. |
|
| Off | The WLAN function is inactive. |
| Phone 1 & 2 | On | The phone is off hook (the handset of phone is |
| (FXS1, FXS2) |
| hanging). |
|
| Blinking | A phone call is incoming. |
| ADSL2+ | On (Green) | ADSL is show time. |
|
| Blinking (Green) | The device starts handshaking. |
|
| Blinking (Orange) | The data is transmitting. |
| ACT (Activity) | On | The router is powered on. |
|
| Blinking | The router is powered on and running properly. |
| LAN (1, 2, 3, 4) | Orange | A normal 10Mbps connection is through its |
|
|
| corresponding port. |
|
| Green | A normal 100Mbps connection is through its |
|
|
| corresponding port. |
|
| Blinking | Ethernet packets are transmitting. |
| For Annex B |
|
|
Interface | Description |
PWR | Connecter for a power adapter with 12~15VDC. |
ON/OFF | Power Switch. |
VoIP 1/2 | Connecter of analog phone for VoIP communication. |
ISDN | Connect for NT1 (or NT1+) box provided by ISDN service provider. |
| While using ISDN service, the LED on the |
| connector will light on. |
Factory Reset | Restore the default settings. |
| Usage: Turn on the router (ACT LED is blinking). Press the hole and |
| keep for more than 5 seconds. When you see the ACT LED begins to |
| blink rapidly than usual, release the button. Then the router will restart |
| with the factory default configuration. |
ADSL 2+ | Connecter for accessing the Internet through ADSL2/2+. |
LAN 4 – 1 | Connecter for local networked devices. |
7
