! WARNING

DM 2610015339 05-11:DM 2610015339 05-11.qxp 5/12/11 9:40 AM Page 14

BEARINGS

Models 100, 200 & 3000 have double ball bearing construction. Under normal use they will not require lubrication.

Cleaning

To avoid accidents always disconnect the tool from the power supply before cleaning or

performing any maintenance. The tool may be cleaned most effectively with compressed dry air. Always wear safety goggles when cleaning tools with compressed air.

Ventilation openings and switch levers must be kept clean and free of foreign matter. Do not attempt to clean by inserting pointed objects through openings.

Certain cleaning agents and ! CAUTION solvents damage plastic

parts. Some of these are: gasoline, carbon tetrachloride, chlorinated cleaning solvents, ammonia and household detergents that contain ammonia.

Extension Cords

If an extension cord is ! WARNING necessary, a cord with

adequate size conductors that is capable of carrying the current necessary for your tool must be used. This will prevent excessive voltage drop, loss of power or overheating. Grounded tools must use 3-wire extension cords that have 3-prong plugs and receptacles.

NOTE: The smaller the gauge number, the heavier the cord.

RECOMMENDED SIZES OF EXTENSION CORDS 120 VOLT ALTERNATING CURRENT TOOLS

Tool’s

Cord Size in A.W.G.

Wire Sizes in mm2

Ampere

Cord Length in Feet

Cord Length in Meters

Rating

25

50

100

150

15

30

60

120

 

3-6

 

 

 

 

 

 

 

 

18

16

16

14

0.75

0.75

1.5

2.5

6-8

18

16

14

12

0.75

1.0

2.5

4.0

8-10

18

16

14

12

0.75

1.0

2.5

4.0

10-12

16

16

14

12

1.0

2.5

4.0

—

12-16

14

12

—

—

—

—

—

—

 

 

 

 

 

 

 

 

 

 

Dremel Accessories

 

Use only Dremel®, high-performance accessories. Other accessories are not

! WARNING

designed for this tool and may lead to personal injury or property damage.

 

The number and variety of accessories for the Rotary Tool are almost limitless. There is a category suited to almost any job you might have to do — and a variety of sizes and shapes within each category which enables you to get the perfect accessory for every need.

Refer to the DREMEL ACCESSORY ORDER FORM for illustrations of the accessories available. These accessories may be found at your local hardware, hobby or home center dealers.

Collets

If you expect to use a variety of accessories, we recommend that in the beginning you purchase a complete set of four collets. Store

these so that you will have the proper size of collet for any accessory or drill bit you want to use. Currently, the 1/8", 3/32",1/32" and 1/16" collets accommodate all of the avail - able Dremel accessories. 1/8" collets are included in most rotary tool kits.

Mandrels

A mandrel is a shank with a threaded or screw head, which are required when you use polishing accessories, cutting wheels, sanding discs, and polishing points. The reason mandrels are used is that sanding discs, cutting wheels and similar accessories must be replaced frequently. The mandrel is a per- manent shank, allowing you to replace only the worn head when necessary, thus saving the expense of replacing the shaft each time.

14

Page 13 Page 15
Page 14
Image 14
Dremel 200, 100, 3000 manual Dremel Accessories, Cleaning, Extension Cords, Bearings, Mandrels
Page 13 Page 15

3000, 200, 100 specifications

The Dremel 100, 200, and 3000 rotary tools represent a significant evolution in the world of multi-tools, each offering unique features, technologies, and characteristics that cater to a variety of crafting and DIY enthusiasts.

The Dremel 100, one of the earlier models, is renowned for its simplicity and reliability. It boasts a powerful motor, which allows for a maximum speed of 35,000 RPM, making it ideal for tasks such as engraving, grinding, and polishing. Its ergonomic design ensures a comfortable grip, aiding in precision work. The tool is compatible with a wide range of Dremel accessories, providing versatility for various applications. However, it is primarily geared towards basic tasks, making it perfect for beginners or those who require straightforward functionality in their projects.

Moving on to the Dremel 200, this model builds upon the foundation of the 100 with additional features that enhance usability. It offers variable speed settings, allowing users to adjust the RPM between 15,000 to 35,000. This level of control is particularly beneficial for tasks that require finesse, such as detailed carving or delicate sanding. The 200 model's dual speed feature not only caters to a broader range of materials but also provides users with more flexibility. Its lightweight design and compact size make it easy to handle and maneuver, further enhancing user experience.

The Dremel 3000 takes innovation to the next level with its advanced design and features. This model incorporates a patented EZ Twist nose cap, which allows for easy accessory changes without the need for a wrench, significantly reducing downtime during projects. The 3000 model also includes a powerful motor capable of reaching speeds of up to 32,000 RPM. Its enhanced ventilation design prevents overheating during longer periods of use, making it ideal for tackling more extensive or persistent tasks. Additionally, the 3000 is compatible with all Dremel accessories and attachments, further expanding its versatility.

All three Dremel models embody a commitment to quality and versatility, proving invaluable tools for crafters and DIY enthusiasts alike. Whether you're a novice or a seasoned professional, the Dremel 100, 200, and 3000 offer the perfect combination of features and technologies to help you achieve exceptional results in your projects, ensuring you can create and innovate with confidence.
Top Page Image Contents