XHD7714 OPERATION
Bluetooth® Operation
Overview
The XHD7714 supports the HFP
Preparation
Before you can use a mobile device with this head unit, it must be connected and authenticated - commonly referred to as "pairing" a device. Please make sure that Bluetooth is activated on your mobile device before you begin the pairing process. Refer to the owner's manual of your mobile device for more details.
Bluetooth Pairing
1)To pair a Bluetooth enabled mobile phone to your head unit, press on the head unit, or press MODE until "BLUETOOTH" scrolls once then "STANDBY" is displayed.
2)Press and hold on the head unit for 5 seconds, until "PAIRING" is displayed, the Bluetooth icon will flash every second. The head unit will begin to broadcast a signal for 90 seconds.
3)Complete the pairing from the Bluetooth menu of your mobile device by searching for new devices. Please refer to your mobile device instructions for further information on Bluetooth pairing and connections. The Bluetooth icon will illuminate solid.
The BTM60 device name is "DUAL BT."
The password for the DUAL XHD7714 is 1234.
Connection Notes
•If ACNT is set to OFF, you must press to connect after pairing.
•From Bluetooth standby mode, press to disconnect your mobile device.
•From Bluetooth standby mode, press to reconnect your mobile device.
•To connect a different mobile device, the currently connected mobile device must be disconnected. If this device has been paired previously, you may reconnect using the mobile device's Bluetooth menu, or repeat the above pairing instructions.
General Note
•Due to the differences in Bluetooth technology, some mobile devices may be incompatible or function improperly when used with the XHD7714.
•The Bluetooth microphone is built into the front panel of the XHD7714.
25