AUTO Menu
With the AUTO menu, the four items shown in the Table below can be performed.
Please perform each operation in accordance with the instructions in the Table.
MENU |
|
|
MAIN | ADJUST | EXECUTE |
KEYSTONE |
| |
POWER OFF |
| |
INPUT | ONE TOUCH |
|
AUTO |
|
|
SCREEN |
|
|
OPTION |
|
|
WIRELESS |
|
|
: SELECT |
|
|
Example : AUTO Menu
(ADJUST)
AUTO Menu
Item |
| Description | |||
|
| ||||
| Auto Adjust (for RGB): Automatically adjusts H POSITION, V POSITION, H | ||||
| PHASE, and H SIZE. Use this function with the maximum window size. | ||||
| Auto Adjust (for | ||||
| appropriate signal mode depending on input signals. This is only performed if | ||||
ADJUST | AUTO is selected on the VIDEO menu item ( | 4 ) of the INPUT menu. | |||
• This function may not be available with a PAL60 signal and certain other | |||||
| |||||
| signals. |
|
|
| |
| • The AUTO mode operation requires approximately 10 seconds. | ||||
| • For COMPONENT VIDEO, the signal type is identified automatically even if this | ||||
| function is inactive. For more information on HDTV signals, see HDTV. ( 4 ) | ||||
|
|
| |||
| Automatic keystone distortion correction: |
| |||
| You can automatically correct vertical keystone distortion corresponding to the | ||||
| angle (forward/backward tilt) at which the unit is set up. | ||||
| • If the projection screen is inclined, or if the projector is angled downwards, it | ||||
KEYSTONE | may not be possible to make the correct adjustment when V: INVERT or H&V: | ||||
| INVERT is selected under the MIRROR item of the MAIN menu. | ||||
| • When the zoom adjustment is set to the TELE side, automatic correction may | ||||
| be excessive. The automatic correction function should be used with zoom | ||||
| set to WIDE whenever possible. |
|
| ||
|
|
|
| ||
| Adjust POWER OFF Time: |
|
| ||
| Long (MAX. 99 min.) | Short (Min. 1 min.) | (DISABLE: 0 min.) | ||
POWER OFF | If the time set here passes without valid signal input (there is no signal input, or | ||||
signal input is out of specifications), the standby mode is set (see "TURNING | |||||
| |||||
| ON THE POWER" Vol.1 15 ). This function is inactive when DISABLE (0 min.) is | ||||
| selected. |
|
|
| |
|
|
| |||
| Enabling/disabling the KEYSTONE | function using the ONE TOUCH | |||
| button: |
|
|
| |
| TURN ON | TURN OFF |
|
| |
ONE TOUCH | Pressing the ONE TOUCH button will automatically retrieve pictures and | ||||
automatically adjust the screen (see “ADJUSTING SCREEN WITH ONE- | |||||
| |||||
| TOUCH” Vol.1 23 ), and you can also set the function to execute KEYSTONE | ||||
| (see above in this table) simultaneously when pressed. KEYSTONE will be | ||||
| executed if TURN ON is selected. |
|
| ||
|
|
|
|
| |
5
