OPTION Menu
With the OPTION menu, the five items shown in the Table below can be performed.
Please perform each operation in accordance with the instructions in
MENU
MAIN | VOLUME |
WHISPER | |
IR REMOTE | |
INPUT | LAMP TIME |
AUTO | FILTER TIME |
SCREEN |
|
OPTION | 12 |
WIRELESS | |
: SELECT |
|
the Table. |
|
| Example : OPTION Menu | ||||||
OPTION Menu |
|
| (VOLUME) | ||||||
|
|
|
|
|
|
| |||
Item |
|
| Description |
|
|
|
|
| |
|
|
|
|
|
|
|
| ||
VOLUME | Adjust Volume: High | Low |
|
|
|
|
| ||
|
|
|
|
|
|
|
| ||
| Select WHISPER Mode: |
|
|
|
|
|
| ||
WHISPER | NORMAL | WHISPER |
|
|
|
|
|
| |
When WHISPER is selected the WHISPER mode is activated. In the WHISPER | |||||||||
| |||||||||
| mode, acoustic noise and screen brightness are reduced. |
|
|
|
|
| |||
|
|
|
|
|
|
| |||
| Selecting the remote control receiver: |
| 2 |
| 3 |
| |||
|
|
|
| ||||||
| The unit has 3 remote control receivers, as shown in the figure |
|
|
|
|
| |||
|
|
|
|
|
| ||||
| to the right (1, 2, and 3). You can select which of them to |
| 1 |
|
|
| |||
IR REMOTE | activate (“v” in the figure), and which to disable. | 1 | 2 |
| 3 |
| |||
• The ambient lighting and other factors may prevent the | 1 | 2 |
| 3 |
| ||||
|
|
| |||||||
| remote control operation from functioning properly. If this | 1 | 2 |
| 3 |
| |||
| 1 | 2 |
| 3 |
| ||||
| happens, use this function to disable receivers being | 1 | 2 |
| 3 |
| |||
| impacted by unneeded light. |
| 1 | 2 |
| 3 |
| ||
|
| 1 | 2 |
| 3 |
| |||
|
|
|
|
|
| ||||
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
| |
| Refer to LAMP TIME: When set, this function displays the total time the |
|
| ||||||
| projector lamp has been used since new. |
|
|
|
|
| |||
Reset LAMP TIME [Use this function only when the lamp has been replaced!]:
| Depress the RESET button for at least 3 seconds while lamp time is being | |
LAMP TIME | displayed. The reset menu will then appear. After you replace the lamp with a | |
new lamp, select RESET on the menu with the button. | ||
|
•Do not reset the lamp time unless you have replaced the lamp. And, always reset the lamp time when replacing the lamp. The message functions will not operate properly if the lamp time is not reset correctly.
•Before replacing the lamp, carefully read the descriptions headed "THE LAMP".
Refer to FILTER TIME: This function displays the total time the
Reset FILTER TIME [Use this function only when the filter is cleaned or replaced!]: Depress the RESET button for at least 3 seconds while lamp time is being displayed. The reset menu will then appear. After you replace the filter, select
FILTER TIME RESET on the menu with the 
button.
RESET 
CANCEL
•Do not reset the filter time unless you have cleaned or replaced the filter. And, always reset the filter time when cleaning or replacing the filter. The message functions will not operate properly if the filter time is not reset correctly.
•Before cleaning or replacing the filter, carefully read the descriptions headed "THE AIR FILTER".
WIRELESS Menu
The WIRELESS menu is only enabled if the wireless function is enabled. Using the wireless function requires a Wireless & Network Module Terminal (sold separately). See the Wireless & Network Module Terminal user’s manual for more information about the WIRELESS menu. Contact your local dealer for more information about the wireless function and Wireless & Network Module Terminal.
7
