S e t t i n g | u p | t h e | P r o j e c t o r |
|
|
|
|
NOTE: To maximize lamp life,
allow the projector to run for at
least five minutes before turning
it off.
Turning Off the Projector
To turn off the projector, press the Power button. A dialog box appears, asking for confirmation. Press the Power button again to turn the lamp off. The fans continue to run for a minute, then the projector shuts off.
If you want to turn the lamp back on, you must allow 90 seconds for the lamp to cool. The lamp won’t light if it’s too hot.
If you want to turn off the projector for a short period of time, press the Power button twice. This puts the projector in standby mode. The lamp goes out, and the fans run and the LED blinks orange for 1 minute. After 1 minute, the fans turn off and the LED lights solid orange. To exit standby mode and return to normal operation, press the Power button.
14
