18
Using the Projector
Using the Keypad and Remote Buttons
While the menus are displayed, the Keysto ne and Vol u m e buttons
on the keypad and the arrow buttons on the remote act as menu
navigation and adjustment buttons and the Source/Select button
on the keypad and the Select button on the remote act as selection
buttons. See “Using the On-Screen Menus” on page21 for details.
FIGURE 11
Keypad and remote buttons
Menu
Press the Menu button to open the on-screen menus. Press Menu
again to close the menus. When you close the menus, the projec-
tor saves any changes you made. The menu automatically closes
after 1 minute if no buttons are pressed. For more information
about the on-screen menus, see page21.
Source/Select (keypad only) or Computer and Video (remote only)
When you have more than one source (computer and video) con-
nected to the projector, select between them by pressing the
Source/Select button on the keypad or the Computer or Video but-
ton on the remote.
Power
Press this button to turn the projector on and off.
LEDs