Default
Returning to Factory Default
The Factory Default feature allows you to change adjustments and set- ting to the factory preset for source except the following:
<Current Signal>
Resets the adjustments for the current signal to the factory preset lev- els.
The items that can be reset are: Brightness, Contrast, Color, Hue, Sharp- ness, Aspect, Horizontal Position, Vertical Position, Clock, Phase and Color Correction.
<All Data>
Reset all the adjustments and settings for all the signals to the factory preset.
The items can be reset except Language, Lamp Remaining Time, Lamp Hour Meter and Filter Usage. To reset the lamp usage time, see “Clear Lamp Hour Meter” and “Clear Filter Usage”.
<Clear Filter Usage>
Resets the filter usage back to zero. Selecting this option displays submenu for a confirmation.
<Clear Lamp Hour Meter>
Resets the lamp clock back to zero. Selecting this option displays submenu for a confirmation.
NOTE: The projector will turn off and go into standby mode after 2100 hours (up to 3100 hours in Eco mode) of service. If this happens, press the “Help” button on the remote control for ten seconds to reset the lamp clock back to zero. Do this only after replacing the lamp.
