Dukane 8767, 8054 manual To connect Scart output RGB, Connecting an External Monitor

To connect SCART output (RGB)

Before connections: An exclusive SCART adapter (ADP-SC1) and a commercially available SCART cable are required for this connection.

NOTE: Audio signal is not available for this connection.

RGB IN Projector

Video equipment such as DVD player

	To RGB IN
Commercially available Female	ADP-SC1
SCART cable

1.Turn off the power to the projector and your video equipment.

2.Use the NEC ADP-SC1 SCART adapter and a commercially avail- able SCART cable to connect the RGB input of your projector and a SCART output (RGB) of your video equipment.

3.Turn on the power to the projector and your video equipment.

4.Use the RGB button on the remote control to select the RGB input.

5.Press the MENU button on the remote control to display the menu.

6.From the menu, select [Advanced] → [Signal Select RGB] → [Scart]. SCART is a standard European audio-visual connector for TVs, VCRs and DVD players. It is also referred to as Euro-connector.

NOTE: The ADP-SC1 SCART adapter is obtainable from your dealer in Eu- rope. Contact your dealer in Europe for more information.

Connecting an External Monitor

Audio cable (not supplied)

LINE IN

PHONE

RGB signal cable (supplied)

RGB signal cable (not supplied)

You can connect a separate, external monitor to your projector to simul- taneously view on a monitor the RGB analog image you're projecting. To do so:

1.Turn off the power to your projector, monitor and computer.

2.Use a 15-pin cable to connect your monitor to the RGB OUT (Mini D- Sub 15 pin) connector on your projector.

3.Turn on the projector, monitor and the computer.

NOTE:

•The RGB OUT connector outputs RGB signal during standby mode. When the projector goes into standby mode, the image on an external monitor disap- pears for a moment.

•When the projector is in the standby mode, the image may not be correctly displayed while the cooling fans are running immediately after turning on or off the power.

•Daisy chain connection is not possible.

E-14