Setting up
Arrangement (continued)
WARNING ►Place the projector in a stable horizontal position. If the projector falls or is knocked over, it could cause injury and/or damage to the projector. Using a damaged projector could then result in fire and/or electric shock.
•Do not place the projector on an unstable, slanted or vibrational surface such as a wobbly or inclined stand.
•Do not place the projector on its side, front or rear position.
•Consult with your dealer before a special installation such as suspending from a ceiling or somewhere else.
►Place the projector in a cool place, and ensure that there is sufficient ventilation. The high temperature of the projector could cause fire, burns and/or malfunction of the projector.
•Do not place or attach anything that would block the lens or vent holes.
•Keep a space of 30 cm or more between the sides of the projector and other objects such as walls.
•Do not place the projector on metallic thing or anything weak in heat.
•Do not place the projector on carpet, cushions or bedding.
•Do not place the projector in direct sunlight or near hot objects such as heaters.
•Do not place anything near the projector lens or vents, or on top of the projector.
•Do not place anything that may be sucked into or stick to the vents on the bottom of the projector. This projector has some intake vents also on the bottom.
►Do not place the projector anyplace where it may get wet. Getting the projector wet or inserting liquid into the projector could cause fire, electric shock and/or malfunction of the projector.
•Do not place the projector in a bathroom or the outdoors.
•Do not place anything containing liquid near the projector.
►Do not place the projector where any oils, such as cooking or machine oil, are used.
►Use only the mounting accessories the manufacturer specified, and leave installing and removing the projector with the mounting accessories to the service personnel.
• Read and keep the user’s manual of the mounting accessories used.
CAUTION ►Avoid placing the projector in smoky, humid or dusty place. Placing the projector in such places could cause fire, electric shock and/or malfunction of the projector.
•Do not place the projector near humidifiers, smoking spaces or a kitchen. Also do not use an ultrasonic humidifier near the projector. Otherwise chlorine and
minerals contained in tap water are atomized and could be deposited in the projector causing image degradation or other problems.
►Position the projector to prevent light from directly hitting the projector's remote sensor.
9
