Dukane 8975WU, 8970, 8971, 8974WU Selecting an input signal, Input button, Button Ports, Video

Operating

Selecting an input signal

1. Press INPUT button on the projector.

Each time you press the button, the projector switches its input port from the current port as below.

COMPUTER IN1  COMPUTER IN2  LAN

VIDEO		INPUT button
	USB TYPE A
S-VIDEO	USB TYPE B
COMPONENT  HDMI 2  HDMI 1

NOTE • If you have set SKIP to some ports from SOURCE SKIP in the OPTION menu, the input from the ports cannot be selected (63).

•While ON is selected for AUTO SEARCH item in OPTION menu, the projector will keep checking the ports in above order repeatedly till an input signal is detected (63).

•It may take several seconds to project the images from the USB TYPE B port.

1. Press COMPUTER 1 / 2, LAN, USB TYPE A / B, HDMI 1 / 2, COMPONENT, S-VIDEO or VIDEO button on the remote control.

The port corresponding to each button is selected as below.

Button	Ports
COMPUTER 1	COMPUTER IN1
COMPUTER 2	COMPUTER IN2
LAN	LAN
USB TYPE A	USB TYPE A
USB TYPE B	USB TYPE B
HDMI 1	HDMI 1
HDMI 2	HDMI 2
COMPONENT	COMPONENT	Buttons for input
S-VIDEO	S-VIDEO
		ports
VIDEO	VIDEO

NOTE • While ON is selected for AUTO SEARCH item in OPTION menu, the projector will keep checking every port sequentially till an input signal is detected (63).

• It may take several seconds to project the images from the USB TYPE B port.

26