Dukane 8970, 8971, 8974WU, 8973W, 976SX, 8975WU, 8972W user manual Option menu, Auto Search

OPTION menu

OPTION menu

From the OPTION menu, items shown in the table below can be performed.

Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item, except for the items LAMP TIME and FILTER TIME. Then perform it according to the following table.

Item Description

The ports can be set to be ignored in searching by the AUTO SEARCH function (below) or in selecting by buttons on the control panel.

(1)Choose a picture input port using the ▲/▼ buttons.

SOURCE SKIP (2) Using the ◄/►buttons turns on/off the

SOURCE SKIP function.

	NORMAL  SKIP
	The port that is set to SKIP will be ignored.
	• It's not possible to set SKIP to all ports at the same time.
	Using the ▲/▼ buttons turns on/off the automatic signal search
	function.
	ON  OFF
	When the ON is selected, detecting no signal automatically cycles
	through input ports in the following order. The search is started from
	the current port. Then when an input is found, the projector will stop
AUTO SEARCH	searching and display the image.
	COMPUTER IN1  COMPUTER IN2  LAN  USB TYPE A
		
	VIDEO	USB TYPE B
		
	S-VIDEO ï COMPONENT ï HDMI 2  HDMI 1
	• It may take several seconds to project the images from the
	USB TYPE B port.
	Using the ▲/▼ buttons turns on/off the automatic keystone function.
	ON  OFF
	ON: Automatic keystone distortion correction will be executed
	whenever changing the slant of the projector.
AUTO	OFF: This function is disabled. Please execute the AUTO
KEYSTONE	KEYSTONE (EXECUTE) in the SETUP menu for automatic
	keystone distortion correction.
	• When the projector is suspended from the ceiling this feature will
	not function properly so select the OFF.
	• This function will be unavailable when the Transition Detector is on
	(88).

(continued on next page)

63