Dukane 976SX, 8970, 8971, 8974WU See Perfect FIT in Correcting the distortion  33, Instalation

SETUP menu

Item

Description

Using the ◄/► buttons corrects the horizontal keystone distortion.

	Shrink the right of the image ó Shrink the left of the image
	• The adjustable range of this function will vary among inputs. For
KEYSTONE	some input, this function may not work well.
	• When the horizontal lens shift is not set to the center, this function
	may not work well.
	• This function is unavailable when the TRANSITION DETECTOR
	(88) is ON or the screen is adjusted by PERFECT FIT (33, 34).
	Selecting this item displays the PERFECT FIT dialog.For details,
PERFECT FIT	see PERFECT FIT in Correcting the distortion (33, 34).
	• This is unavailable when the TRANSITION DETECTOR is ON
	(88).
	Using the ▲/▼ buttons turns on/off the AUTO ECO MODE.

ON ó OFF

AUTO ECO MODE • When ON is selected, the projector will always be set to Eco mode at start-up regardless of the ECO MODE (below) setting. An OSD message “AUTO ECO MODE” will be displayed for tens of seconds when the projector starts with this function activated.

Using the ▲/▼ buttons turns off/on the Eco mode. NORMAL ó ECO

ECO MODE • When the ECO is selected, acoustic noise and screen brightness are reduced.

•When AUTO ECO MODE (above) is set to ON, the projector will always be set to Eco mode at start-up regardless this setting.

Pressing the ►button displays the dialog for changing the

INSTALLATION setting.

	FRONT / DESKTOP
	
	REAR / DESKTOP
	
INSTALATION	REAR / CEILING
	
	FRONT / CEILING

Use the ▲/▼ buttons to select the desired setting on the INSTALLATION dialog, and press the ENTER button of the remote control or the INPUT button of the projector to execute.

If TRANSITION DETECTOR is ON and the INSTALLATION status is changed, the TRANSITION DETECTOR ON alarm (88) will be displayed when the projector is restarted.

(continued on next page)

53