Maintenance and Troubleshooting
Indicators
The Power and Lamp indicators show the status of the projector. Before requesting repair, check the projector status using the chart below. If the problem cannot be resolved contact your dealer.
Power | Lamp | Conditions | Notes | |
(Green) | (Red) | |||
|
|
Slow
flashing
On
On
On
Fast
flashing
Fast
flashing
Off | Stand by | |
mode | ||
|
Off | On mode |
Slow
flashing mode
Fast
flashing mode
On
Fast High flashing temperature
Projector is ready to be turned on (normal)
Projector is on and operating normally
Projector is in
The projector has detected a problem with an internal fan, the lamp will shut off automatically, contact your dealer
T h e l a m p | c o v e r i s o p en | o r t h e r e i s |
a problem | with the lamp. | If the lamp |
door is closed and replacing the lamp does not correct the issue, contact your dealer.
The projector has overheated and shut the lamp off. Correct the over temp condition immediately.
1.Check that the ventilation slots are free from obstructions
2.Check the cleanliness of the air filter.
3.If the condition persists, contact your dealer
Slow | Slow | The lamp does not light., come back ”stand | |
flashing | flashing | mode | by mode”, and turn on the power button. |
50
