Wide Screen Operation with Computer Signals
Switch to the wide screen mode to expand the 4 : 3 image to fill the entire screen.
1.Press the WIDE button on the remote control.
2.Within 3 seconds ...
Press the WIDE button again.
The screen size switches as follows:
→ NORMAL → ANAMORPHIC → ZOOM
NORMAL size screen (4:3 or SXGA 5:4)
The picture has the same size as the normal computer image.
ANAMORPHIC size screen
The image is expanded in the horizontal direction.
ZOOM size screen
When wide signals are input.
ANAMORPHIC size screen
Information
Supported resolution
See page 7 of Model Information for details on the display output of the various VESA signal standards supported by the monitor.
When 852 (848) dot 480 line wide VGA* signals with a vertical frequency of 60 Hz and horizontal frequency of 31.7 (31.0) kHz are in- put
Select an appropriate setting for RGB SELECT mode referring to the“ Table of Signals Supported” on page 7 of Model Information.
*“ VGA” , “ SVGA” and “ SXGA” are registered trademarks of IBM, Inc. of the United States.
Note:
Do not allow the displayed in 4:3 mode for an extended period. This can cause a phosphor
13
