Information
⬛RGB SELECT modes
One of these 7 modes must be selected in order to display the following signals correctly.
AUTO: Select the suitable mode for the specifications of input signals as listed in the table “ Computer input signals supported by this system” on page 7 of Model Information.
STILL: To display VESA standard signals. (Use this mode for a still image from a computer.)
MOTION: The video signal (from a scan converter) will be converted to RGB signals to make the picture more easily viewable. (Use this mode for a motion image from a computer.)
WIDE1: When an 852 dot× 480 line signal with a horizontal frequency of 31.7kHz is input, the image may be compressed horizontally. To prevent this, set RGB SELECT to WIDE1.
WIDE2: When an 848 dot× 480 line signal with a horizontal frequency of 31.0 kHz is input, the image may be compressed horizontally. To prevent this, set RGB SELECT to WIDE2.
WIDE3: When an 1920 dot× 1200 line signal with a horizontal frequency of 74.0 kHz is input, the image may be compressed horizontally. To prevent this, set RGB SELECT to WIDE3.
DTV: Set this mode when watching digital broadcasting (480P).
See page 7 of Model Information for the details of the above settings.
Setting the signal and black level for DVI signal
Choose the signal for the DVI connector (PC or STB/ DVD) and set the black level.
Example: Setting the “PLUG/PLAY” mode to “STB/ DVD”
On “ SET UP” menu, select “ DVI SET UP” , then press the MENU/ENTER button.
The “ DVI SET UP” screen appears.
On “ PLUG/PLAY” of “ DVI SET UP” menu, select “ STB/ DVD” .
DVI SET UP
PLUG/PLAY: STB/DVD
BLACK LEVEL | : HIGH | |
SEL. | ADJ. | EXIT RETURN |
Information
⬛PLUG/PLAY settings
PC: When connected to the PC signal.
BLACK LEVEL is set to “ LOW” automatically. STB/DVD: When connected to the SET TOP BOX, DVD etc.
BLACK LEVEL is set to “ HIGH” automatically.
⬛BLACK LEVEL settings
LOW: When connected to the PC signal.
HIGH: When connected to the SET TOP BOX, DVD etc. Change “ HIGH” into “ LOW” if the black level appears gray.
Setting the video signal format
Use these operations to set the color systems of composite video signals or Y/C input signals.
Example: Setting the color system to “3.58 NTSC”
On “ COLOR SYSTEM” | of “ SET UP” menu, select | ||
“ 3.58NTSC” . |
|
| |
|
|
| |
| SET UP | ||
| LANGUAGE | : ENGLISH |
|
| BNC INPUT | : COMPONENT |
|
| D - SUB INPUT | : RGB |
|
| HD SELECT | : 1080 I |
|
| RGB SELECT | : AUTO |
|
| DVI SET UP |
|
|
| COLOR SYSTEM | : 3 . 58NTSC |
|
| BACK GROUND | : GRAY |
|
| GRAY LEVEL | : 3 |
|
| S1/S2 | : OFF |
|
| DISPLAY OSM | : ON |
|
| OSM ADJ. | : TOP LEFT |
|
| ALL RESET | : OFF |
|
| SEL. ADJ. | EXIT RETURN |
|
Information
⬛Video signal formats
Different countries use different formats for video signals. Set to the color system used in your current country. AUTO: The color systems are automatically identified and the format is set accordingly.
PAL: This is the standard format used mainly in the United Kingdom and Germany.
SECAM: This is the standard format used mainly in France and Russia.
4.43NTSC, PAL60: This format is used for videos in countries using PAL and SECAM video signals.
3.58NTSC: This is the standard format used mainly in the United States and Japan.
Setting the background color when no signal is being input
The color displayed on the background when there is no signal can be set to gray.
Example: Setting “BACK GROUND” to “BLACK”
On “ BACK GROUND” | of “ SET UP” menu, select | ||
“ BLACK” . |
|
| |
|
|
| |
| SET UP | ||
| LANGUAGE | : ENGLISH |
|
| BNC INPUT | : COMPONENT |
|
| D - SUB INPUT | : RGB |
|
| HD SELECT | : 1080 I |
|
| RGB SELECT | : AUTO |
|
| DVI SET UP |
|
|
| COLOR SYSTEM | : AUTO |
|
| BACK GROUND | : BLACK |
|
| GRAY LEVEL | : 3 |
|
| S1/S2 | : OFF |
|
| DISPLAY OSM | : ON |
|
| OSM ADJ. | : TOP LEFT |
|
| ALL RESET | : OFF |
|
| SEL. ADJ. | EXIT RETURN |
|
Information
⬛BACK GROUND Settings
BLACK: Sets the background color to black.
GRAY: Sets the background color to gray.
Setting this makes it easier to see that there is no signal.
22