Dukane P42A specifications OSM On Screen Menu Controls, Menu Operations

OSM (On Screen Menu) Controls

Menu Operations

The following describes how to use the menus and the selected items.

1. Press the MENU/ENTER button on the remote control to display the MAIN MENU.

	MAIN MENU
PICTURE			SET UP
AUDIO			FUNCTION
IMAGE ADJ.			SIGNAL INFO.
SEL.		OK	EXIT EXIT
	MENU/ENTER

2. Press the cursor buttons ▲ ▼on the remote control to highlight the menu you wish to enter.

3.Press the MENU/ENTER button on the remote control to select a sub menu or item.

	P I C T U R E
PICTURE MEMORY			: OFF
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT			R		G
NR			:	OFF
COLOR TEMP.			:	MIDDLE
GAMMA			:	2 . 2
LOW TONE			:	AUTO
SET UP LEVEL			:	0%
COLOR TUNE
CINEMA MODE			: ON
PICTURE MODE			: NORMAL
SEL.	ADJ.	MENU/ENTER		OK EXIT RETURN

4.Adjust the level or change the setting of the selected item by using the cursor buttons
 on the remote control.

CONTRAST

10

5.The adjustments or the settings that are stored in memory. The change is stored until you change it again.

6.Repeat steps 2 –5 to adjust an additional item, or press the EXIT button on the remote control to return to the

main menu.

*When adjusting using the bar at the bottom of the screen, press the
or  button within 5 seconds. If not, the current setting is set and the previous screen appears.

Note: The main menu disappears by pressing the EXIT button.

14