OSM ORBITER
Use this to set OSM menu shift.
Example: Setting “OSM ORBITER” to “OFF”
On “ OSM ORBITER” of “ PDP SAVER” menu, select “ OFF” .
| PDP SAVER | |
PEAK BRIGHT | : 100% | |
ORBITER |
| : OFF |
INVERSE/WHITE | : OFF | |
SCREEN WIPER | : OFF | |
SOFT FOCUS | : OFF | |
OSM ORBITER | : OFF | |
OSM CONTRAST | : LOW | |
SEL. | ADJ. | EXIT RETURN |
Information
⬛OSM ORBITER settings
ON: The position of the menu will be shifted by eight dots each time OSM is displayed.
OFF: OSM will be displayed at the same position.
OSM CONTRAST
Use this to reduce the brightness of OSM menu.
Example: Setting “OSM CONTRAST” to “NORMAL”
On “ OSM CONTRAST” of “ PDP SAVER” menu, select “ NORMAL” .
| PDP SAVER | |
PEAK BRIGHT | : 100% | |
ORBITER |
| : OFF |
INVERSE/WHITE | : OFF | |
SCREEN WIPER | : OFF | |
SOFT FOCUS | : OFF | |
OSM ORBITER | : ON | |
OSM CONTRAST | : NORMAL | |
SEL. | ADJ. | EXIT RETURN |
Information
⬛OSM CONTRAST settings NORMAL: OSM brightness is set to normal. LOW: OSM brightness is set to lower.
Setting Closed Caption
This function sets several closed caption modes that allows text to be superimposed on display.
Example: Setting “CAPTION2”
On “ CLOSED CAPTION” of “ FUNCTION” menu, select “ CAPTION2” .
| F U N C T I O N | |
POWER MGT. | : OFF | |
INPUT SKIP | : OFF | |
PDP SAVER | : MANUAL | |
CLOSED CAPTION | : CAPTION2 | |
CAPTION CONT | : LOW | |
SEL. | ADJ. | EXIT RETURN |
Information
⬛CLOSED CAPTION settings
OFF: This exits the closed caption mode.
CAPTION1~4: Text is superimposed.
TEXT1~4: Text is displayed in full screen.
A closed caption signal may not be decoded in the following signature;
1.when a video tape has been dubbed.
2.when the signal reception is weak.
3.when the signal reception is nonstandard.
When using closed captioned channel or the text mode, the text screen always appears.
When there is no signal, however, the text screen will not display text characters.
Reducing the brightness of Closed Caption
Use this to reduce the brightness of Closed Caption.
Example: Setting “NORMAL”
On “ CAPTION CONT” of “ FUNCTION” menu, select “ NORMAL” .
| FUNCTION | |
POWER MGT. | : OFF | |
INPUT SKIP | : OFF | |
PDP SAVER | : MANUAL | |
CLOSED CAPTION | : OFF | |
CAPTION CONT | : NORMAL | |
SEL. | ADJ. | EXIT RETURN |
Information
⬛CAPTION CONT settings
NORMAL: Closed Caption brightness is set to normal.
LOW: Closed Caption brightness is set to lower.
Signal Information Menu
Checking the frequencies, polarities of input signals, and resolution
Use this function to check the frequencies and polarities of the signals currently being input from a computer, etc. On “ MAIN MENU” , select “ SIGNAL INFO.” , then press the MENU/ENTER button.
The “ SIGNAL INFORMATION” is displayed.
|
|
|
| SIGNAL INFORMATION |
| |||
|
|
| H . FREQUENCY | : | 48 | . 4KHz |
| |
|
|
| V. FREQUENCY | : | 60 | . 0Hz |
| |
|
|
| H . POLARITY | : | NEGATIVE |
| ||
|
|
| V. POLARITY | : | NEGATIVE |
| ||
|
|
| MEMORY | : | 24 |
|
| |
|
|
| RESOLUTION | : | 1024 ×768 |
| ||
|
|
| SEL. | ADJ. | EXIT RETURN |
| ||
|
|
| PC: | MEMORY will be displayed. | ||||
|
|
| ||||||
Others: MODE will be displayed.
26
