Inserting the Label Cassette
Your label maker uses DYMO D1 label cassettes.
To insert the label cassette
1 | Lift the label cassette cover to open the label | |
| compartment. See Figure 4. |
|
2 | Make sure the tape and ribbon are taut |
|
| across the mouth of the cassette and |
|
| that the tape passes between the label | Ribbon |
| guides. See Figure 5. | rewind |
| spool | |
| If necessary, turn the ribbon rewind |
|
| spool clockwise to tighten the ribbon. |
|
3 | Insert the cassette and press firmly until | Label |
| the cassette clicks into place. See | |
| guides | |
| Figure 6. |
|
4 | Close the label cassette cover. |
|
Printing Your First Label
The first time you turn on the power, you are asked to select the language and label width. These selections remain set until you change them.
To set up the label maker
1Press Power to turn on the power.
2Select the language and press OK.
Figure 4
Figure 5
Figure 6
3Select the width of the label cassette currently in the label maker and press OK.
3