![Inserting the Battery](/images/new-backgrounds/157000/1570007x1.webp)
Become familiar with the features shown in Figure 2.
1 | 7 |
|
|
|
| 2 |
|
|
|
| 3 |
|
|
|
|
| 6 |
| 5 |
| 4 |
|
|
|
| Figure 2 |
|
1 | Battery compartment | 4 | Power connector | 7 Cleaning tool |
2 | Cutter button | 5 | USB connector |
|
3 | Label exit slot | 6 | Label compartment |
|
Inserting the Battery
To insert the battery
1 Slide the battery compartment cover away from the label maker. See Figure 3.
2 Insert the battery into the battery compartment.
3 Replace the battery compartment cover.
To charge the battery |
|
1 Plug the charging adapter into the power | Figure 3 |
connector on the top of the label maker. |
|
2Plug the other end of the charging adapter into a power outlet.
NOTE The charging adapter is only used for recharging the battery; the charging adapter cannot be used to power the label maker.
2