Optimizing settings/Troubleshooting

Control possibilities

The Dynaudio SUB 250 provides two controls to match the frequency response of the subwoofer and the main speakers perfectly:

SUB Lowpass: the upper cut-off frequency of the subwoofer, which can be continuously adjusted between 50 and 150 Hz. Above the selected cut-off frequency the sound pressure level decreases rapidly.

SAT Highpass: the lower cut-off frequency of the main speakers; 60 Hz, 80 Hz or Flat (neutral) can be selected. Below the selected cut-off frequency the sound pressure level decreases rapidly.

Note:

The settings for the cross-over frequencies just have an impact on the signal at the SAT/SUB Input! The LFE channel is just used to reproduce very low frequent effect signals. Consequently signals at the SUB I/O - LFE/Slave In are not limited in their frequency response.

General tips

XSUB Lowpass = 80 Hz

The cut-off frequency should be selected as low as possible. Then the subwoofer works without being recognized as a single signal source. Very often a cut-off frequency of 80 Hz has been experienced as an ideal value.

XReduce weak amplifiers and small speakers from bass load

By limiting the reproduction of low frequency at the SAT Output, amplifiers and speakers connected to this output are freed from reproducing the heavy bass load, which negatively impacts the sound quality. This will improve the overall sound of your audio system.

XPlay a music track that has a significant amount of bass over a large bass region. An instrument such as a double-bass or bass-guitar is very suitable. Listen carefully to the bass-line played by the instrument. As it goes up and down in the bass range, the overall bass volume should remain the same – be it with very deep or higher bass notes.

Specific tips

Note:

Many processors/receivers provide extensive bass management capabilities to set the cut-off frequencies for both subwoofer and speakers. If using the bass management of the processor/receiver, set the controls of the SUB 250 as followed:

SUB Lowpass = 150 Hz (at the very right)

SAT Highpass = Flat

16

Dynaudio SUB 250

Page 18
Image 18
Dynaudio SUB 250 manual Control possibilities, General tips, Specific tips

SUB 250 specifications

The Dynaudio SUB 250 is a powerful and sophisticated subwoofer designed to deliver deep, accurate bass performance for music enthusiasts and home theater aficionados alike. This subwoofer boasts a modern design that seamlessly integrates into any environment while providing high-quality audio reproduction.

At the heart of the SUB 250 is a robust 10-inch bass driver, engineered to deliver a precise and dynamic sound across a wide frequency range. The driver utilizes Dynaudio's proprietary technology to ensure low distortion, resulting in a clean and powerful bass response. This translates into an immersive listening experience, where every note and beat is felt as much as it is heard.

One of the key features of the SUB 250 is its advanced amplifier, capable of delivering up to 250 watts of peak power. This powerful amplification allows the subwoofer to handle demanding audio tracks without compromising performance. The class D amplifier ensures high efficiency and less power consumption, making the SUB 250 not only powerful but also energy-efficient.

The SUB 250 incorporates several intelligent technologies to enhance performance and usability. One such feature is the adjustable crossover frequency, which allows users to seamlessly integrate the subwoofer with their existing speaker systems. This flexibility is crucial for achieving the perfect balance between the subwoofer and the main speakers, ensuring optimal sound reproduction across the entire audio spectrum.

Additionally, the SUB 250 is equipped with multiple connection options, including RCA and speaker-level inputs, making it compatible with various audio systems. This versatility ensures that users can easily incorporate the subwoofer into their home entertainment setups, whether they are utilizing a stereo system or a full surround sound configuration.

The design of the SUB 250 is another highlight, featuring a sleek cabinet that minimizes resonance and vibration. The enclosure is constructed to support the driver effectively, allowing for extended low-frequency output without compromising sound quality. The subwoofer is available in a variety of finishes, allowing it to blend seamlessly with any décor.

In summary, the Dynaudio SUB 250 is an elite subwoofer that excels in delivering deep, accurate bass while offering advanced features and technologies for flexibility and ease of use. Its combination of powerful performance, intelligent design, and versatility makes it an excellent choice for anyone looking to enhance their audio experience.