Dynex DX-55L150A11 Adjusting the volume, Displaying program information, Navigating the menus, On-screenmenu overview, MUTE, To adjust the volume:

12 DX-55L150A11 Understanding the basics

•To select a digital channel, press the number buttons to select the main digital channel, then press the dot (.) button, then the number buttons again to select the sub-channel. Wait for the channel to change or press ENTER to change the channel.

Note: Button presses must be within three seconds of each other.

• Press RECALL to go to the last channel viewed.

Adjusting the volume

To adjust the volume:

•Press VOL /VOL to to increase or decrease the volume.

•Press MUTE to temporarily turn off all sound. Press MUTE again to restore the sound.

Displaying program information

To display program information:

•Press INFO to show an information banner. The information banner shows current program information such as channel number, video input source, and resolution.

•Digital signal information—Displays channel number, station name, channel label (if preset), broadcast program name, TV rating, signal type, audio information, resolution, CC mode, current time, and current program start and end times when watching a digital channel.

•Analog signal information—Displays channel number, channel label (if preset), signal type, audio information, and resolution when watching an analog channel.

•Press GUIDE to show the digital program guide, which may show a list of available programs, program times, and program summaries, depending on the information provided by the broadcaster.

Navigating the menus

MENU Press to display the Main menu.

Press to select menus, to adjust selected items, or move on-screen cursor left or right.

ENTER

Press to select the menu items.

ENTER

ENTER	Press to confirm your selection or enter a
	sub-menu.

EXIT	Press to close the menu or return to the
	previous screen.

On-screen menu overview

Use the on-screen menu to configure the various operational settings of your TV. To access the menu, press MENU. The menus and their corresponding functions are described in the following table:

	Picture	Lets you enable one of six preset viewing
	Mode	options optimized for different viewing
		conditions.
	Brightness	Lets you adjust the level of brightness on the
		screen. Increasing brightness can add more
		light to dark areas of the picture.
	Contrast	Lets you adjust the level of picture contrast.
		Increasing the contrast adds more light to the
		white areas of the picture.
	Color	Lets you adjust the level of color intensity.
Video
	Tint	Lets you adjust the overall color of the picture
		(only supported in TV/AV mode).
	Sharpness	Lets you adjust the focus of the picture.
		Increase sharpness for a clearer picture, or
		decrease sharpness for a smoother picture.
	Color	Lets you select one of three preset color
	temperature	temperature settings: Cool, Standard, or
		Warm.
	Advanced	Accesses advanced video settings such as
	Video	Adaptive Contrast, Noise Reduction, Overscan
		(in HDMI only), and Dynex Motion 120Hz.
	Balance	Lets you adjust the balance between the left
		and right speakers.
	Surround	Lets you turn the surround sound effect on or
	Sound	off.
	Equalizer	Lets you select the audio frequency you want
		to adjust and change its value.
	Auto	Lets you select whether to apply the audio
Audio	Volume	settings for all input sources, as well as for
	Control	both analog and digital TV channels (OFF), or
		only to the current one (ON).
	SPDIF Type	Lets you select the preferred audio format for
		SPDIF audio signals. SPDIF is only available on
		digital channels or when using an HDMI
		device. Choose from PCM, RAW, or Off.
	OSD	Lets you select the language for the on-screen
	Language	display. Choose from English, French, or
		Spanish.
	Screen	Lets you select the aspect ratio of the screen.
	Mode	Choose from AUTO, Normal, Wide, or
		Cinema to Zoom.
	DPMS	Use this setting when using your TV with a
		computer. When using a connected computer,
		lets the computer control if the screen is on or
		off.
	Time Setup	Lets you configure the system clock and time
		zone settings. You can also choose to enable
		the Date/Time features and set up the sleep
		timer.
Setup	Caption	Lets you configure the settings for closed
		captioning (CC, also known as subtitles) in TV
		programs.
	Reset	Lets you reset all operational settings to their
	Default	default factory value. Do this only if any of the
		following conditions occurs:
		• The system fails to respond to the remote
		control (make sure the remote control
		batteries are still working and that you are
		within the transmission range).
		• The new configuration settings cause
		unexpected results.
		• You forget the system PIN.