Dynex DX-55L150A11 Adjusting the picture, To adjust the picture:, Color, Tint, To choose the display format:, Cinema

Adjusting the picture DX-55L150A11 13

	Channel	Lets you select certain channels to be blocked.
	Block
	Program	Lets you select certain programs to be
	Block	blocked.
	Input Block	Lets you select certain input sources to be
		blocked.
Parental	Change	Lets you set a new password for parental
	Password	controls.
	Button Lock	Lets you lock TV buttons so that only the
		remote control can operate the TV. Removing
		the AC power and reconnecting it resets this
		function back to default.
	Clean All	Eliminates all channels (and presets) stored in
		the TV.
	Tuner Mode	Lets you select the signal source for your TV
		(Antenna or Cable).
	Channel	Lets you initiate an automatic channel scan to
	Scan	set up the available channels in your TV.
	Channel	Lets you select certain channels to eliminate
	Skip	from the available channels list.
TV
	MTS/SAP	Lets you enable the SAP (Second Audio
		Program) function. This lets you listen to a
		program using an alternative second
		language. Function availability depends on
		your TV provider.
	Audio	Lets you select the language track you prefer
	Language	for viewing digital TV programs. Available
		options depend on your digital TV provider.

Note: Menu items that are not selectable are grayed out. Menus in this manual are described in TV mode, unless otherwise indicated.

Adjusting the picture

To adjust the picture:

1Press MENU. The Main menu opens.

2Press ENTER or . The Video menu opens.

&XVWRP

Color

Tint

3Press or to highlight an option, then press or to adjust the option. You can select:

•Picture Mode—Selects the picture mode. You can select:

•Vivid (a bright and vivid picture)

•Standard (a standard picture)

•Theater (a finely detailed picture)

•Energy Saving (the backlight brightness is decreased)

•Sports (a dynamic picture)

•Custom (customized picture).

•Brightness–Lets you increase or decrease the brightness of the picture. Increasing the brightness can add more light to dark areas of the picture, while decreasing the brightness can add more darkness to light areas of the picture.

•Contrast–Lets you increase or decrease the contrast of the picture. Increase the contrast to adjust the white areas of the picture or decrease the contrast to adjust the black areas of the picture.

•Color–Lets you adjust the intensity of the colors.

•Tint–Lets you adjust the overall color of the picture (only supported in TV/AV mode).

•Sharpness–Lets you increase the sharpness level for clearer images or decrease the sharpness level for smoother images.

•Color temperature –Lets you change the color temperature. You can select the color temperature from three options: Cool, Standard, or Warm.

•Advanced Video–Lets you access and adjust advanced video settings,such as Noise Reduction, Adaptive Contrast, Overscan (only in HDMI), or Dynex Motion 120Hz.

•Dynex Motion 120Hz:–Eliminates motion blur to provide clear detail and smooth motion. You can adjust:

•Effect–Off, Low (minimum effect), Medium (Provide smooth and clear picture motion for normal use), and High (eliminates motion blur to provide clear detail and smooth motion).

•Demo Partition–Sets the 120 Hz demo area size and location. You can choose All, Right, or Left.

•Demo–Displays the differences between the picture when the option is turned on and off.

•Reset Picture Settings–Resets all picture settings to the factory defaults.

4Press MENU to return to the previous menu, or press EXIT to close the menu.

Choosing the display format (aspect ratio)

To choose the display format:

•Press ZOOM on the remote control repeatedly to cycle through the available display formats. Options include:

•Auto —Selects the correct aspect ratio automatically.

•Normal —Selects the correct aspect ratio to match the source image.

•Zoom —Enlarges the picture but may crop the top and bottom.

•Wide—Shows a full-screen picture.

•Cinema—Stretches the picture at the edges [21:9 aspect], but maintains a good aspect ratio at the center of the screen.

Note: You can also press PICTURE on the remote control to select the picture mode.