Dynex DX-LCD32-09 MENU, Tint, ENTER, Color, Normal, Picture, Picture, Picture, Sharpness, Sharpness, Brightness, Brightness, Changing channels, Digital sub-channels

12	Using your TV

5Press or to select a channel, then press ENTER to hide the channel (remove the check mark).

Note: If the channel list has more than one page, press or to scroll to the next page.

6Press EXIT to save your changes and close the menu system.

Changing channelsDigital sub-channels

A digital TV signal transmits more data than an analog signal. This increase in data provides a better picture and sound with less static and interference.

The increased data capacity of a digital signal also lets broadcasters fit several channels into the same bandwidth as an analog signal. Broadcasters may use these sub-channelsto transmit a variety of information, such as weather forecasts, foreign languages, commercials.

A digital sub-channel is indicated by the main channel number followed by a dot and the sub-channel number. For example, 5.1 indicates sub channel 1 of the main channel 5.

To change channels:

•Press CH+ or CH– to go to the next or previous channel in the memorized channel list.

•To select an analog channel, press the number buttons for the channel you want, then wait for the channel to change or press ENTER to immediately change the channel.

•To select a main digital channel, press the number buttons for the main channel, press , then wait for the channel to change or press ENTER to immediately change the channel.

•To select a digital sub-channel, press the number buttons for the main channel, press , then press the number button for the sub channel. Wait for the channel to change, or press ENTER to immediately change the channel.

Note: Button presses must be within three seconds of each other.

•To go to the last channel viewed, press RECALL.

•To select a channel from the memorized channel list, press CH.LIST, press or to select the channel, then press ENTER.

Note: If the memorized channel list has more than one page, press or

to scroll to the previous page or next page.

•To select a channel from the favorite channel list, press FAVORITE, press or to select the channel, then press

ENTER.

Note: If the favorite channel list has more than one page, press or to scroll to the previous page or next page.

Adjusting the picture

To adjust the picture:

1Press MENU. The on-screen menu opens.

2Press or to select Picture, then press to open the Picture menu.

Picture Sound Time Setup Lock Channel

Picture Mode	Standard
Contrast		50
Brightness		50
Color		50
Tint		0
Sharpness		50
Color Mode		Cool
Select	Move	MENU Exit

3Press or to select an option, then press or to adjust the option. You can adjust:

•Picture Mode—SelectsStandard, Dynamic, Soft, or Personal.

•Contrast—Adjusts the amount of white between the lightest and darkest parts of the image.

•Brightness—Adjusts the overall lightness or darkness of the image.

•Color—Adjusts the color intensity (saturation).

•Tint—Adjusts the tint of the image.

•Sharpness—Adjusts the clarity of the image.

•Color Mode—Selects Warm (intense colors), Cool (softer colors), or Normal (standard colors).

4Press MENU to return to the previous menu, or press EXIT to close the menu system.

Note: You can also press PICTURE to select the Picture Mode.

Adjusting the VGA (PC) image

To adjust the VGA (PC) image:

1Make sure that your TV is in VGA mode, then press MENU. The on-screen menu opens.