20

Specifications

General

Problem

Solution

 

 

One or more channels

• Make sure that your TV has

cannot be displayed.

memorized channels.

 

• Make sure that the channel has

 

not been deleted from the

 

memorized channel list. If the

 

channel was deleted, you can

 

press the number buttons on the

 

remote control to tune to the

 

channel.

 

• Make sure that the channel is not

 

blocked through the parental

 

controls.

 

 

Password lost.

• If you have forgotten the

 

password, enter 1397 to open the

 

Lock menu and set a new

 

password.

 

 

Some menu options cannot

• If an option is grayed, the option

be accessed.

is not available for the current

 

video input mode.

 

 

TV cabinet creaks or makes

• This is not a malfunction. When

noises.

you use your TV, the temperature

 

inside the cabinet increases. This

 

causes the cabinet to expand or

 

contract, which makes a creaking

 

noise.

 

 

Control buttons on the TV

• Unplug the power cord, wait a

do not work.

few seconds, plug the cord back

 

in again, then turn on your TV.

 

 

Specifications

Product design and specifications are subject to change without notice.

Type

LCD TV

 

 

Panel

32" TFT LCD

 

 

TV system

NTSC-M, ATSC

 

 

Receiving channels

VHF: 2-13

 

UHF: 14-69

 

CATV: 1-125

 

CADTV: 1-135

 

DTV: 2-69

Audio multiplex

BTSC system

 

 

Audio out

6 W × 2

 

 

Power requirement

AC 120 V, 60 Hz

 

 

Power consumption

150 W

 

 

Dimensions

31.9 × 23 × 10 inches

(W × H × D)

(81.1 × 58.3 × 25.5 cm)

 

 

Weight

30.9 lbs (14 kg)

 

 

Temperature

Storage: 32° to 122°F (0° to 50°C)

 

Working: 41° to 104°F (5° to 40°C)

Input ports

Composite video/audio (L/R) (1)

 

S-Video (1)

 

Component video/audio (L/R) (2)

 

HDMI (2)

 

VGA/audio (1)

 

Antenna (1)

Output ports

Composite video/audio (L/R) (1)

 

Headphone (1)

 

S/PDIF (optical) (1)

Control port

RS-232

 

 

Legal notices

FCC Part 15

This equipment has been tested and found to comply within the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced technician for help.

FCC warning

Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user’s authority to operate this equipment.

FCC warning

This is a CLASS B product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures to counter interference.

Notices

Specifications and features are subject to change without notice or obligation.

For service and support call (800) 305-2204.