8

Setting up your TV

Connecting an HDMI device

You can connect two HDMI devices.

To connect an HDMI device:

•Connect an HDMI cable to the HDMI 1 or HDMI 2 jack on the back of your TV and to the HDMI Out jack on the HDMI device.

HDMI cable

HDMI device

Note: If you want to connect a DVI device, use a DVI-to-HDMI adapter cable to connect the device to the HDMI 1 or HDMI 2 jack, then connect an audio cable to the VGA AUDIO IN jack.

To play from an HDMI device:

1Turn on your TV, then press INPUT. The INPUT SOURCE menu opens.

2Press or to select HDMI1 or HDMI2, then press ENTER.

Note: You can press HDMI once to select HDMI1 or twice to select HDMI2.

3Turn on the HDMI device, then set it to the correct mode. See the documentation that came with the device for instructions.

Connecting a component video device

You can connect two component video devices.

To connect a component video device:

•Connect a component video cable to the COMPONENT IN 1 or COMPONENT IN 2 jacks on the back of your TV and to the Component Out jacks on the component video device.

To play from the component video device:

1Turn on your TV, then press INPUT. The INPUT SOURCE menu opens.

2Press orto select COMPONENT1 or COMPONENT2, then press ENTER.

Note: You can press COMP once to select COMPONENT1 or twice to select

COMPONENT2.

3Turn on the component video device, then set it to the correct mode. See the documentation that came with the device for instructions.

Connecting a computer

You can use your TV as a computer monitor.

Note: When the computer goes into standby mode, your TV turns off. If your TV does not turn on when you “wake” your computer, press the POWER button on your TV or remote control.

To connect a computer:

1Connect a VGA cable to the VGA PIC jack on the back of your TV and to the VGA jack on the computer.

VGA cable

Audio cable

2Connect an audio cable to the VGA AUDIO jack on the back of your TV and to the Audio Out jack on the computer.

To use your TV as a computer monitor:

1Turn on your TV, then press INPUT. The INPUT SOURCE menu opens.

2Press or to select VGA, then press ENTER.

3Turn on the computer, then adjust the display properties, if necessary.

 

Audio cable

 

 

 

 

 

Component video cable