Dynex DX-LCD37-09 Checking the antenna signal strength, Setting the sleep timer, For a 16:9 video signal, To check the antenna signal strength:, To set the sleep timer:

16	Using your TV
For a 16:9 video signal	Checking the antenna signal strength
	To check the antenna signal strength:
	1 Press MENU. The on-screen menu opens.

Normal Zoom

Cinema Wide

•Normal–Squeezes the picture horizontally to be displayed at 4:3. Black bars appear on the sides of the picture.

•Zoom–Enlarges the center of the picture. The outer part of the picture is cropped.

•Wide—Displays the picture at its original size.

•Cinema—Displays the picture at its maximum size without changing its aspect ratio. The outer part of the picture is cropped.

For a computer image

Normal Wide

Dot-by-Dot

•Normal—Stretches the image proportionally. Black bars appears on the sides of the image. Availability of this option depends on the aspect ratio of the input signal.

•Wide—Stretches the image to fill the screen.

•Dot-by-Dot—Displays the image in its original size.

Setting the sleep timer

To set the sleep timer:

•Press SLEEP repeatedly to select the amount of time you want your TV to wait before it turns itself off. You can select 30min, 60min, 90min, or 120min.

•To turn off the timer before it expires, press SLEEP repeatedly until Sleep Off appears.

Note: If you unplug the power cord or a power failure occurs, the sleep timer is canceled.

2Press or to select CHANNEL, then press ENTER.

Channell

Autoscan

Channel List

Manual Register

Antenna

3Press or to select Antenna, then press ENTER.

4Press the number buttons or CH or CH to select the channel you want to check the signal strength for. A screen opens that shows the signal strength.

Antenna

Back

Now 0 Peak 0

CH Ch Change

If the video input source is not TV, the following screen opens. You cannot check the signal strength when the video input source is an external device.

Antenna

Back

Indicator is available for antenna signal only.

CH Ch Change

5Press MENU to close the menu.